Skip to content
Light • Power • Heat

LPH Series

LPH20LPH60LPH100

The LPH series combines a light tower, power supply, and flameless heat into a single trailer-mounted unit. Three models — the LPH20, LPH60, and LPH100 — scale from compact remote site deployments up to large industrial operations. One rental. Zero coordination.

Request a Quote ⤓ Spec Sheet (PDF)
LPH Series
01 — Overview

One rental
replaces three.

Lights, power, and flameless heat — engineered into one trailer. Drop a single asset on site and walk into a fully-lit, fully-powered, fully-heated jobsite. Choose the model that fits your heat load, and scale up if the job demands it.

100% Flameless Operation

Clean, dry, breathable air with zero CO₂ or moisture added — safe for enclosed spaces, concrete curing, and sensitive environments.

Three Models. One Philosophy.

From 225,000 BTU to 1,500,000+ BTU — the LPH series scales to match your job without ever staging a second rental.

02 — What It Does

Three jobs.
One trailer.

The LPH was built so a remote crew can drop a single asset and walk away — without staging a second rental.

L Light

Wide-area site illumination.

A 31-foot mast puts broad, adjustable illumination exactly where you need it — no separate tower rental required.

  • 31-foot pin on/off light tower
  • 4-, 8-, or 16-light configurations
  • 24,500 lumens per light
  • Adjustable mast positioning
P Power

Stable supply for remote sites.

Reliable power output for tools, controls, and instrumentation — straight from the same unit heating and lighting your site.

  • Powers tools, controls, and instrumentation
  • Automatic power limiting of heating system
  • Compatible with site distribution panels
H Heat

100% flameless. Breathable hot dry air.

Flameless heat with redundant safety shutdowns built in — no combustion, no byproducts, no risk. Available from 225,000 BTU to 1,500,000+ BTU depending on model.

  • 100% flameless output
  • 0°F inlet → 200–212°F outlet (model dependent)
  • Redundant emergency & temperature shutdown
  • Safe for enclosed and confined spaces
03 — Choose Your Model

Three models.
One decision.

Whether you're heating a single structure or a full industrial site, there's an LPH built for the job. Compare models below or call us and we'll size it for you.

LPH20LPH60LPH100
BTU Output 225,000 750,000 1,500,000+
Air Volume 1,150 CFM 5,000 CFM 8,000–9,000 CFM
Pressure 8" WC 14" WC 28" WC (1 PSI)
Delta T 0°F → 200°F 0°F → 212°F 0°F → 212°F
Fuel Usage 1.3 gal/hr 4.6 gal/hr 6.1 gal/hr
Standard Runtime 75 hrs 86 hrs 60 hrs
Extended Runtime 240 hrs* 130 hrs* 100 hrs*
Fuel Containment Double-walled 110% 110%
Stabilization 5-point 5-point 5-point
Sound Level 85 dB @ 10ft 85 dB @ 10ft 85 dB @ 10ft
Weight (Empty) 3,720 lbs 7,200 lbs 12,000 lbs
Weight (Full) 4,430 lbs 9,600 lbs 15,790 lbs
Dimensions 124"L×79"W×99"H 270"L×104"W×143"T 20'3"L×7'6"W×12'6"T

* Extended runtime with optional large-capacity trailer

Not sure which model fits your job? Call 1-780-267-6569
04 — Specifications

The numbers.

⤓ Spec Sheets (PDF)

LPH20

Heater Output225,000 BTU
Air Volume1,150 CFM
Water Column Pressure8 inches WC
Delta T0°F inlet → 200°F outlet
Fuel Usage1.3 gal/h at full load
Run Time75 hours (standard tank)
Voltage120V or 480V
Electrical ClassificationGeneral Purpose
Light Tower31-foot, pin on/off
Lights4, 8, or 16 lights @ 24,500 lumens/light
Stabilization5-point
Sound Level85 dB @ 10ft
Weight3,720 lbs empty / 4,430 lbs full
Dimensions124"L × 79"W × 99"H
Options
  • 350-gallon triple-axle trailer (240 hrs runtime)
  • GPS tracking
  • Video surveillance
  • Remote troubleshooting & monitoring
  • Circulating heater for engine

LPH60

Heater Output750,000 BTU
Air Volume5,000 CFM
Water Column Pressure14 inches WC (0.5 PSI)
Delta T0°F inlet → 212°F outlet
Fuel Usage4.6 gal/h at full load
Fuel Capacity396 gallons
Run Time86 hours (standard tank)
Dimensions270"L × 104"W × 143"T
Weight7,200 lbs empty / 9,600 lbs full
Fluid Containment110%
Stabilization5-point
Sound Level85 dB @ 10ft
Light Tower31-foot, pin on/off
Lights2–16 lights @ 24,500 lumens/light
Electrical ClassificationGeneral Purpose
Options
  • 600-gallon triple-axle trailer (130 hrs runtime)
  • Voltage: 480V or 600V
  • Blower: 42" WC (1.5 PSI @ 6,500 CFM) or 55" WC (2 PSI @ 6,000 CFM)
  • GPS tracking
  • Video surveillance
  • Remote troubleshooting & monitoring
  • Circulating heater for engine

LPH100

Heater Output1,500,000+ BTU
Air Volume8,000–9,000 CFM
Water Column Pressure28 inches WC (1 PSI)
Delta T0°F inlet → 212°F outlet
Fuel Usage6.1 gal/h at full load
Fuel Capacity350 gallons
Run Time60 hours (standard tank)
Dimensions20'3"L × 7'6"W × 12'6"T
Weight12,000 lbs empty / 15,790 lbs full
Fluid Containment110%
Stabilization5-point
Sound Level85 dB @ 10ft
Light Tower31-foot, pin on/off (optional)
Electrical ClassificationGeneral Purpose
Options
  • 600-gallon triple-axle trailer (100 hrs runtime)
  • Blower: 42" WC (1.5 PSI @ 6,500 CFM) or 55" WC (2 PSI @ 6,000 CFM)
  • Circulating heater for engine
05 — Why Choose Us

Three reasons crews
keep calling us back.

01

All-in-one mobile platform

One trailer replaces three rentals. Heat, light, and power from a single drop — no coordinating between separate vendors, no extra trailers to track.

02

Safe for any environment

Zero combustion means zero CO₂, zero moisture, and zero open-flame risk. The LPH series is cleared for occupied spaces, enclosed structures, and anywhere a flame isn't permitted.

03

Built for remote sites

Forklift pockets, lifting points, GPS tracking, and surveillance options make the LPH as easy to manage as it is to deploy — wherever the job takes you.

Applications
O&GConstructionFacilitiesPipelinesTanksBoilersEquipmentWell HeadsGround ThawDehumidificationGrain DryingConcrete CuringTemporary Power
Ready to heat

Time to save.
Time to go electric.

Tell us about your site, your timeline, and your tools — we'll get you a written quote within 24 hours.

REQUEST A QUOTE Call 1-780-267-6569